Avo Turbo Kit - Stage 4 - Complete Billet Turbo kit for GT86 & BRZ
New 2020 Specification!
Stage 4 turbo kits have been upgraded to include a new larger intercooler, intercooler entry pipe, washer bottle, 3" exhaust outlet & 3" exhaust front pipe with 5" cat.
Designed as a full bolt on kit with no cutting or welding required!
Also one of the rare kits that retain the original front bumper reinforcing beam (crash bar).
Combine the kit with our Fensport Turbo Remap for a turbo solution that looks and drives like it would from the factory!
Avo 2049 Billet Turbocharger with 8psi actuator
360 degree thrust bearing.
The turbocharger is rated for 480hp of flow, so there is certainly headroom available for future tuning.
Mechanical Oil Pump Specifications:
Avo are unique in using a mechanical oil pump located at the back of the engine, driven by the camshaft. There is also a oil reservoir tank, to the right of the turbocharger. This is the most reliable way to lift oil back to the engine, as it keeps the flow rate in sync with engine rpm.
Bar & Plate construction with cast end tanks
Intercooler pipework uses black wire-reinforced silicone piping and black powder coated steel piping.
The intake piping has ports to mount up a variety of blow-off valves.
GT86 & BRZ Avo Turbo kit features:
- Oil and water-cooled 2049 Turbocharger - 360 degree thrust bearing
- Unequal Length Exhaust Manifold
- Larger intercooler
- Larger diameter intercooler entry pipe
- 3" Turbocharger Outlet Pipe
- 3" Exhaust front pipe with 5" cat.
- Mechanical Oil Pump
- Turbo oil reservoir tank
- Turbo oil fillar neck & PCV valve system
- OEM blow off valve
- All assorted hoses, clamps & necessary fittings included
- Fits both RHD & LHD
- Low mounted turbo kit gives low centre of gravity and a near factory appearance.
- Clutch - Although its possible to use the standard clutch, it is preferred to upgrade for reliability and to hold the increased torque.
Electronic 3 port boost vsv
3 bar map Sensor - allows the ecu to read boost levels above 0.37 bar (stock sensor) also can provide a signal for overboost protection.
Avo 50/50 dump valve
Forge dump valve
Avo - breather system
We recommend a 2.5" exhaust as a minimum for power levels up to 285bhp after this we recommend 3".
We offer a full fitting service, please contact us for a quotation, and we also provide a Turbo Remap service using EcuTek software.
GT86 Avo Turbo Launch
- Subaru BRZ 2012 On
- Subaru BRZ 2017 On BRZ
- Toyota GT86 2012 to 2016
- Toyota GT86 2017 On